What tasks require metal heat treatment
We perform heat treatment of metal parts with controlled heating, holding, and cooling modes to achieve the required mechanical properties for a specific manufacturing task.
Key features:
- Selection of the heat treatment mode according to material, geometry, and part requirements
- Control of temperature, heating time, and the sequence of the technological process
- Work with one-off parts, small batches, and serial orders
- Result verification after treatment according to agreed technical requirements
Benefits for your production:
- Required hardness, wear resistance, or mechanical properties depending on the task
- Better alignment of part properties with operating requirements
- Ability to prepare parts for assembly, repair, or further production
- A clear process: from material analysis to control after heat treatment
Typical heat treatment tasks clients bring to TM “Bulit”
-
Changing the mechanical properties of metal parts
Clients contact us when parts need heat treatment to achieve the required hardness, strength, stability, or further suitability for operation.
-
Heat treating shafts, gears, and production components
Heat treatment is relevant for parts such as shafts, gears, bushings, tools, machine components, and other metal parts that must withstand specific working conditions.
-
Selecting the treatment mode for the material and task
Before quoting, we review the material grade, part geometry, required result, operation type, quantity, drawings, and whether hardening, annealing, normalizing, or tempering is needed.
What we consider during metal heat treatment
We combine industrial equipment and an engineering approach to select the heat treatment mode according to the material, geometry, and requirements for the finished part.
-
Temperature and heating time control
- We work with controlled heating modes
- We select holding time according to the material and task
- We consider the risk of unwanted deformation and internal stresses
-
Different types of heat treatment
- We perform hardening, annealing, normalizing, and tempering
- We select the technological process according to the specifics of the part
-
One-off parts and production batches
- We work with individual parts, small batches, and production batches
- We keep agreed modes for repeat batches
-
Work with different metals
- We process carbon and alloy steel
- We work with stainless steel
- Other alloys are reviewed after clarifying the material and task
-
Quality control after treatment
- We check the result according to agreed requirements
- We control part geometry after heat treatment
- If needed, we record parameters for repeat orders
-
Treatment mode selected for each specific part
- We analyze the drawing, material, or sample before starting
- We select the treatment mode according to the material, geometry, and required mechanical properties
How heat treatment
of parts is performed at TM “Bulit”
We follow a controlled process: analyze the material and task, select the heat treatment mode, perform treatment, and check the result after completion.
-
Consultation and order intake
- We analyze the material, geometry, and purpose of the part
- We define the required treatment type: hardening, annealing, normalizing, or tempering
- We clarify requirements for the result, hardness, wear resistance, or further use
-
Technical calculation of modes
- We select temperature, holding time, and cooling mode for the specific material
- We agree on cost, lead time, and scope of work
- We define what control is required after heat treatment
-
Heat treatment execution
- We process parts in furnaces according to the agreed mode
- We control heating, holding, and cooling according to the technological process
- We work to achieve the required mechanical properties of the part
-
Quality control after treatment
- We check the result after heat treatment according to agreed requirements
- We control geometry, hardness, or other parameters if they are included in the task
- If needed, we record parameters for repeat or serial orders
-
Finished part handover
- We prepare the parts for pickup or delivery
- If needed, we agree on additional operations after heat treatment
Equipment for metal heat treatment
Furnaces and control equipment help select the heat treatment mode according to the material, part dimensions, and required mechanical properties.
Furnaces for hardening and annealing:
|
temperature mode control | uniform heating of parts within the equipment’s capabilities |
Normalizing and annealing chambers:
|
processing for the required metal structure | suitable for one-off parts and batches |
Additional equipment:
|
hardness control devices | tools for checking geometry after treatment |
| Parameter | Capabilities |
Treatment type
|
hardening, annealing, normalizing, tempering |
Materials
|
carbon, alloy, and stainless steel; other alloys — after clarification |
Part dimensions
|
to be agreed according to the actual equipment capabilities |
Before starting an order, we check the material, dimensions, geometry, and result requirements to select the correct heat treatment mode.
Need heat treatment for your part?
Send us a drawing, photo, or part parameters — a TM “Bulit” engineer will assess the material, dimensions, treatment type, and hardness or wear resistance requirements.
Examples of parts after heat treatment
We show examples of metal heat treatment work — parts go through heating, holding, cooling, and result control according to agreed requirements.
Quality control after heat treatment
We support the order from material analysis to result verification after treatment so the parts meet the agreed technical requirements.
-
Control after treatment
- We check the heat treatment result according to agreed requirements
- We control geometry, hardness, or other parameters if they are included in the task
-
Technical support
- We advise on the material, heat treatment type, and processing modes
- We suggest how to prepare parts for treatment to achieve a better result
-
Repeat and serial orders
- We record agreed parameters for future batches
- We can repeat the treatment mode for parts of the same type
-
Clarification before launch
- We clarify the material, dimensions, treatment type, and result requirements before starting the order
- We agree on important parameters to reduce the risk of errors during heat treatment
Frequently Asked Questions
Answers to common questions about quoting, technical requirements, manufacturing, equipment, and cooperation with TM “Bulit”.
-
What types of heat treatment do you perform?
We perform hardening, annealing, normalizing, and tempering of metal. The treatment type is selected after assessing the material, part dimensions, purpose, and requirements for mechanical properties.
-
What hardness can be achieved after heat treatment?
The result depends on the metal grade, initial condition of the part, heating mode, holding time, and cooling mode. Before starting, we clarify the hardness requirements and agree on realistic processing parameters.
-
What materials can be processed?
We work with carbon, alloy, and stainless steel. Other alloys are reviewed individually after clarifying the material, part geometry, and required result.
-
What part dimensions can be processed?
Part dimensions must be agreed before ordering, because processing feasibility depends on the actual size, shape, material, and type of heat treatment.
-
Can I order heat treatment of one part?
Yes, we work with one-off parts as well as small or serial batches. For repeat orders, we can keep agreed processing parameters.
-
How long does metal heat treatment take?
The timeline depends on the treatment type, material, part dimensions, number of items, and current production workload. We provide the actual timeline after assessing the task.
-
What is needed to calculate heat treatment cost?
Send us a drawing, photo, or part parameters. It is best to specify the material, dimensions, quantity, required treatment type, and requirements for hardness, wear resistance, or further use.
Recommended Services
for Your Production
Sheet and tube laser cutting in Lviv
Laser cutting of sheet metal up to 18 mm and tubes Ø20–200 mm from drawings, DXF, DWG, or PDF files for production blanks.
Proceed
CNC milling services in Lviv
CNC milling of metal parts from drawings, 3D models, STEP, DXF, or DWG files for assemblies, equipment, and production batches.
Proceed
Turning services in Lviv
Turning of shafts, bushings, axles, flanges, threaded parts, and other production components based on drawings, samples, or technical specifications.
Proceed
Get a quote for metal heat treatment
Send us a drawing, photo, or part parameters — a TM “Bulit” engineer will assess the material, dimensions, treatment type, and result requirements.
After clarifying the task, we will select the heat treatment mode, calculate the cost, and agree on realistic lead times.
we will contact you