FlexRack SLD — sheet metal storage rack for workshop use
FlexRack SLD is designed for organized storage of sheet metal, blanks and remnants after laser cutting or other production operations. The rack has a sectional design, profile tube frame and swivel casters, and can be adapted to the number of sections, sheet format and conditions of your production area.
Capabilities and design:
- Number of sections: 9 as standard, with the option to change on request.
- Sheet format: sections for sheets, blanks or cutting remnants up to 1500 × 1500 mm.
- Frame: profile tubes for structural rigidity and stability.
- Mobility: swivel casters for moving the rack within the working area.
- Options: increased number of sections, reinforced casters or anti-corrosion coating if required.
Typical use cases:
- Organized storage of sheet metal in a production or warehouse facility.
- Sorting remnants after laser cutting, machining or blank preparation.
- Fast access to the required sheet without chaotic material storage on the floor.
- Configuration selection based on sheet dimensions, number of sections, casters, coating and workshop conditions.
FlexRack SLD is suitable for production facilities that need to organize sheet metal and make sheet handling more convenient for operators.
Typical client tasks for FlexRack SLD
-
Organizing sheet metal storage in the workshop
Clients contact us when sheet metal, blanks, or cutting remnants need to be stored in a more structured, accessible, and space-efficient way.
-
Sorting sheets and remnants after cutting
FlexRack SLD is relevant for workshops where different sheet formats, blanks, or laser cutting remnants need separate sections for easier search, handling, and reuse.
-
Selecting a rack for specific sheet formats and movement needs
Before selection, we review sheet dimensions, number of sections, workshop layout, expected load, caster type, coating requirements, operating conditions, and movement method.
Benefits of FlexRack SLD for sheet metal storage
FlexRack SLD helps organize sheet metal, blanks and cutting remnants in a production workshop. The sectional design, profile tube frame, swivel casters and configurable layout allow the rack to be adapted to actual sheet formats and working conditions.
-
9 sections as standard
The sections allow sheet metal, blanks or cutting remnants to be separated by format, material or production order.
-
Sheets up to 1500 × 1500 mm
The sections are suitable for storing sheets, blanks and metal remnants up to 1500 × 1500 mm after laser cutting or processing.
-
Profile tube frame
The profile tube frame provides structural rigidity and rack stability during sheet metal storage.
-
Swivel casters
The casters make it easier to move the rack within the working area, taking into account the allowable load and floor condition.
-
Fast access to sheets
The parallel section layout helps find the required sheet faster without chaotic material storage on the floor.
-
Options for workshop conditions
If required, reinforced casters, an increased number of sections or anti-corrosion coating can be provided.
-
Organization of cutting remnants
FlexRack SLD helps store sheet metal remnants after cutting separately, making them easier to find and reuse.
Technical specifications of FlexRack SLD
Key parameters of FlexRack SLD for assessing compatibility with your sheet metal stock, blank formats, number of sections, working area dimensions, mobility requirements and workshop operating conditions.
Model: |
FlexRack SLD — rack for storing sheet metal, blanks and cutting remnants. |
Number of sections
|
9 (can be changed on request) — for sorting sheets by format, material or production tasks. |
Section height
|
Up to 1500 mm — parameter for selecting the rack based on the height of sheets, blanks or metal remnants. |
Section length
|
Up to 1500 mm — allows sheets and cutting remnants to be stored within the section format. |
Frame
|
Profile tubes — the structural base for rack rigidity and stability during operation. |
Casters
|
Swivel — for moving the rack within the working area, taking into account load and floor condition. |
Front section
|
Reinforced frame — for additional structural rigidity in the loading and section access area. |
Dimensions
|
H 1900 × W 1800 × D 1900 mm — basic dimensions for planning the installation space and movement routes in the workshop. |
Coating
|
Anti-corrosion if required — an option for high-humidity conditions or specific operating requirements. |
Rack weight
|
Confirmed based on the selected configuration — this parameter is clarified during quoting, taking into account sections, casters and additional options. |
Additional options
|
Increased number of sections, reinforced casters — for adapting FlexRack SLD to sheet format, load and movement conditions. |
Need to select a rack for your sheet metal formats?
Send a request — we will clarify sheet sizes, number of sections, working area dimensions, need for casters, coating and workshop operating conditions.
FlexRack SLD — design and sections for sheet metal
View the design of the FlexRack SLD sheet metal rack: sections, profile tube frame, swivel casters, reinforced front frame and overall sheet placement format. The gallery helps evaluate how the rack can fit into your production or storage area.
How we manufacture FlexRack SLD for your production
We work step by step: clarifying sheet metal formats, number of sections, available area, movement routes, need for casters, coating and additional options. This helps select the FlexRack SLD configuration for actual workshop conditions.
-
Analysis of sheets and working area
We clarify the formats of sheet metal, remnants or blanks, frequency of access to sections, installation location and available workshop area.
-
Configuration selection
We define the number of sections, rack dimensions, caster type, need for a reinforced frame, anti-corrosion coating and additional options.
-
Configuration approval
We prepare the technical solution and agree on the sectional design, frame, sheet placement, dimensions and operating requirements.
-
Rack manufacturing
We manufacture FlexRack SLD according to the agreed number of sections, profile tube frame, casters, coating and conditions of use.
-
Pre-handover inspection
We check manufacturing quality, frame rigidity, section condition, caster operation, reinforced front frame and compliance with the agreed configuration.
-
Delivery and consultations
We organize handover of the rack to the client and provide recommendations on sheet placement, movement, care and safe operation.
Need a sheet metal storage rack for your workshop?
FlexRack SLD can be selected for specific formats of sheet metal, blanks or cutting remnants. Send a request — we will clarify sheet sizes, number of sections, working area dimensions, caster type, need for anti-corrosion coating and prepare a quote.
we will contact you
Warranty and service support for FlexRack SLD
After manufacturing and handover of FlexRack SLD, we provide consultations on rack operation, sheet metal placement, working with sections, checking casters, frame condition, reinforced frame and further care of the structure.
-
12-month warranty
Before handover to the client, the rack is checked for manufacturing quality, frame rigidity, section condition, caster operation, reinforced front frame and compliance with the agreed configuration.
-
Operating consultations
We help with questions related to sheet placement, sorting cutting remnants, access to sections, rack movement and organization of the working area.
-
Care recommendations
We provide recommendations for inspecting the profile tube frame, casters, sections, coating and the zones most heavily loaded during operation.
-
Components and modifications
We help select or manufacture additional sections, reinforced casters, frame elements or other options to adapt FlexRack SLD to new tasks.
-
Personnel support
We explain the rules for using the rack, distributing sheets across sections, moving the rack, inspecting casters and handling sheet metal correctly in the workshop.
Frequently Asked Questions
Answers to common questions about quoting, technical requirements, manufacturing, equipment, and cooperation with TM “Bulit”.
-
What can be stored in FlexRack SLD?
FlexRack SLD is designed for storing sheet metal, blanks and remnants after laser cutting or other production operations. The rack configuration should be selected according to the format, weight and storage conditions of the material.
-
What sheet sizes can be placed in the rack?
FlexRack SLD sections are designed for sheets with a height up to 1500 mm and length up to 1500 mm. These parameters should be considered when selecting the rack for your sheet metal formats.
-
How many sections does FlexRack SLD have?
FlexRack SLD has 9 sections as standard. If needed, the number of sections can be changed on request to match sheet format, material quantity and storage logic in the workshop.
-
Can the rack be moved around the workshop?
Yes. FlexRack SLD is equipped with swivel casters that allow the rack to be moved within the working area, taking into account load, floor condition and operating conditions.
-
What are the basic rack dimensions?
The basic dimensions of FlexRack SLD are H 1900 × W 1800 × D 1900 mm. Before manufacturing or quoting, it is worth checking whether these dimensions fit your available area, aisles and movement routes.
-
Can a reinforced version be ordered?
Yes. For FlexRack SLD, reinforced casters, an increased number of sections or anti-corrosion coating can be provided depending on workshop conditions, sheet format and method of use.
-
What is needed to quote FlexRack SLD?
For a preliminary quote, we need to know the sheet metal formats, number of sections, available workshop area, need for mobility, caster type, operating conditions, coating and additional options.
Similar equipment for production lines
Made to order
FlexTurn OSPB — Rotary Table for Production
Custom rotary table for assembly, fixation and processing of parts, with height adjustment and a 360° platform.
Proceed
Made to order
SteelGrab KMV — Metal Waste Bucket
Industrial steel bucket for collecting, storing and moving metal waste, production remnants and heavy materials with a forklift.
Proceed
Made to order
STN — Mobile Stainless Steel Rack
Open stainless steel mobile rack with 4 shelves and locking casters for storing and moving inventory, products or materials.
Proceed
Need a sheet metal storage rack for your workshop?
Send us your FlexRack SLD requirements: sheet metal formats, number of sections, available workshop area, movement routes, need for swivel or reinforced casters, coating requirements and operating conditions.
A TM “Bulit” engineer will review the parameters and prepare a rack configuration for organized storage of sheets, blanks and cutting remnants.
we will contact you