DrillPro MSO-2 — semi-automatic machine for trimming and drilling blanks
DrillPro MSO-2 is designed for sequential blank processing: edge trimming with a circular knife and hole drilling to a specified depth. The machine helps standardize a repetitive operation, reduce manual operator work and improve process stability in the production area.
Operating principle
The operator places blanks into a 9-position cassette. The products are fed to the circular knife for trimming and then move to the drilling position. The drilling cycle is started with the “START” button, while pneumatic clamps fix the blanks during processing.
Design features
The 9-position cassette provides sequential blank feeding, pneumatic clamps improve fixation stability, and the semi-automatic mode simplifies the operator’s work. The machine can be used for blanks of suitable sizes in production processes where trimming and drilling are required.
Typical client tasks for DrillPro MSO-2
-
Standardizing trimming and drilling of blanks
Clients contact us when repeated trimming and drilling operations need to become more stable, predictable, and convenient than fully manual processing.
-
Processing blanks with semi-automatic operation
DrillPro MSO-2 is relevant when a production area needs controlled edge trimming, hole drilling, cassette feeding, and pneumatic fixation without moving to a fully automatic line.
-
Selecting equipment for a specific blank and process
Before selection, we review blank dimensions, trimming length, hole depth, required output, power supply, pneumatic requirements, operator workflow, and workshop conditions.
Benefits of DrillPro MSO-2 for trimming and drilling blanks
DrillPro MSO-2 is designed for stable, repetitive blank processing in a production workflow. The machine combines edge trimming, hole drilling, fixation with pneumatic clamps and a semi-automatic cycle to reduce manual labor and maintain a steady work pace.
-
Performance up to 1000 pcs/hour
The semi-automatic cycle allows blanks to be processed at a stable pace with performance up to 1000 pcs/hour.
-
Reduced operator contact with the working area
Pneumatic clamps fix the blanks during drilling, so the operator does not need to hold each blank manually during the working cycle.
-
Fewer manual operations
Sequential feeding, trimming and drilling help reduce the physical workload for personnel and standardize the process.
-
Use in the production area
DrillPro MSO-2 can be implemented in the production process as a standalone machine for preparing blanks before subsequent operations.
-
Industrial design
The robust design is intended for regular operation in production conditions while following the recommended operating parameters.
-
Repeatable fixation and processing
The circular knife, drills and pneumatic clamps help maintain repeatable blank processing and reduce the risk of displacement during the cycle.
-
Access to assemblies for maintenance
The design provides access to the main assemblies for cleaning, inspection and scheduled technical maintenance.
Technical specifications of DrillPro MSO-2
The key parameters of DrillPro MSO-2 help evaluate the machine’s performance, allowable blank dimensions, drilling depth, connection requirements and operating conditions in the production facility.
Model: |
MSO-2 — machine model for semi-automatic trimming and drilling of blanks. |
Output |
up to 1000 pcs/hour — performance for stable serial blank processing. |
Product length before trimming
|
210 ± 10 mm — allowable blank length before the trimming operation. |
Length of product after trimming
|
180 ± 5 mm — product size after the trimming operation. |
Hole depth
|
130–160 ± 5 mm — drilling depth range according to the machine parameters. |
Number of drills
|
9 pcs. — number of drills for simultaneous blank processing in the working cycle. |
Drill diameter
|
24–25 mm — drill diameter for forming the hole in the blank. |
Supplied pressure
|
0.6 MPa — supplied pressure parameter for operation of the machine’s pneumatic assemblies. |
Electrical power supply
|
380 V, 50 Hz — connection to a three-phase industrial electrical network. |
Installed power
|
1.5 kW — installed equipment power for operation of the main assemblies. |
Overall dimensions (L × W × H) |
2205 × 994 × 1225 mm — dimensions for planning the machine placement in the production area. |
Equipment weight
|
280 kg — machine weight to consider during transportation, installation and placement. |
Operating conditions
|
+5…+10°C, humidity ≤80% — recommended equipment operating conditions. |
DrillPro MSO-2 is designed for stable trimming and drilling of blanks in semi-automatic mode. The technical parameters help assess whether the machine matches your product dimensions, required hole depth, performance needs and operating conditions.
Need to select a machine for your blank?
Send a request — we will clarify the blank dimensions, trimming operation, hole depth, required performance and working conditions in your workshop.
Gallery of DrillPro MSO-2
View photos of DrillPro MSO-2 to evaluate the machine design, working area, assembly layout, cassette access and equipment placement in the production space.
How we implement DrillPro MSO-2 in your production
Before implementing DrillPro MSO-2, we analyze the blank type, required trimming length, hole depth, performance and workshop conditions. This allows us to select the machine configuration and prepare the equipment for stable operation in your process.
-
Blank and process analysis
We study the type of blanks, their dimensions, required trimming operation, drilling depth and repeatability requirements for processing.
-
Machine parameter selection
We clarify the trimming length, hole depth, drill diameter, pneumatic clamp operation and performance required for your production area.
-
Delivery and installation
We organize the installation of DrillPro MSO-2, taking into account the workshop layout, power supply, pneumatics and production work schedule.
-
Setup and operational check
We check the operation of the circular knife, drills, pneumatic clamps, start cycle and blank processing stability.
-
Personnel training
We explain the cassette loading procedure, cycle start, safe machine operation, cleaning and basic maintenance to operators.
-
Service and support
We provide consultations, warranty and post-warranty service, as well as assistance with adapting the equipment to new production tasks.
Need a DrillPro MSO-2 quote for your blank?
Send a request — a TM “Bulit” engineer will clarify the blank type, trimming length, hole depth, required performance and equipment operating conditions in your workshop.
DrillPro MSO-2 is selected for a specific production operation: trimming, drilling and stable repetitive blank processing.
we will contact you
Warranty and technical support for DrillPro MSO-2 from TM “Bulit”
DrillPro MSO-2 is supplied with warranty and service support to help maintain stable machine operation after startup. The TM “Bulit” team helps with setup, operator training and further equipment maintenance.
-
Equipment warranty
Before handover to the client, the machine is checked across its main assemblies, drives, pneumatic elements and working cycle.
-
Engineering consultations after startup
We help with operating mode setup, process adaptation to blanks and consultations on DrillPro MSO-2 operation.
-
Service maintenance
We perform scheduled checks, cleaning, preventive maintenance and inspection of assemblies that affect trimming and drilling stability.
-
Components compatible with DrillPro MSO-2
We select parts and assemblies that match the machine configuration and support correct operation after replacement or maintenance.
-
Personnel training
We explain the cassette loading procedure, cycle start, safe operation, cleaning and basic technical maintenance to operators.
Frequently Asked Questions
Answers to common questions about quoting, technical requirements, manufacturing, equipment, and cooperation with TM “Bulit”.
-
Which blanks is DrillPro MSO-2 suitable for?
DrillPro MSO-2 is designed for blanks of suitable sizes where edge trimming and hole drilling need to be performed in a semi-automatic cycle. Before pricing, we clarify the product dimensions, material, required length after trimming and hole depth.
-
What is the machine’s performance?
DrillPro MSO-2 has a performance of up to 1000 pcs/hour. The actual operating speed depends on the blank type, processing mode, feed organization and working conditions in the production area.
-
How many drills are used in DrillPro MSO-2?
The machine is equipped with 9 drills. This configuration allows several blanks to be processed in the working cycle and helps maintain a stable production pace.
-
What drill diameter is provided?
The technical specifications of DrillPro MSO-2 indicate a drill diameter of 24–25 mm. If other processing parameters are required, this should be clarified separately during consultation with an engineer.
-
What is the drilling depth?
The hole depth is 130–160 ± 5 mm. This parameter should be compared with your blank and the requirements of the next technological operation.
-
What are the product dimensions before and after trimming?
The product length before trimming is 210 ± 10 mm, and after trimming it is 180 ± 5 mm. These parameters are important to consider before selecting the machine for a specific blank.
-
What connection is required for machine operation?
DrillPro MSO-2 requires a 380 V, 50 Hz electrical power supply and 0.6 MPa supplied pressure. The installed equipment power is 1.5 kW.
-
What operating conditions are recommended?
Recommended operating conditions are: temperature +5…+10°C and relative humidity ≤80%. Before installation, it is worth checking whether your production area meets these conditions.
-
Can DrillPro MSO-2 be integrated into a production process?
Yes. DrillPro MSO-2 can be used as a standalone machine in a blank preparation area or implemented into the production process with consideration for workshop layout, product feeding, power supply and pneumatics.
Similar equipment for production lines
Made to order
AirPack RP — Bag Opener
Equipment for automatic or semi-automatic bag opening before packaging bread and other food products.
Proceed
Made to order
ClipLine KL-1 — manual clip sealing line
Manual equipment for closing polyethylene or polypropylene bags with clipband tape. Suitable for food and bakery products.
Proceed
Made to order
DrillMaster MSO3 — Trimming and Drilling
Automatic machine for end trimming and drilling frozen food blanks in serial food production.
Proceed
Need a semi-automatic machine for trimming and drilling blanks for your process?
Send us your DrillPro MSO-2 requirements: blank type and material, product dimensions before and after trimming, required hole depth, drilling diameter, expected performance, power supply, pneumatic connection and workshop operating conditions.
A TM “Bulit” engineer will review the parameters and prepare a machine configuration for your production operation.
we will contact you