DrillMaster MSO3 — automatic machine for trimming and drilling frozen semi-finished products
DrillMaster MSO3 automates two sequential operations in the production of frozen semi-finished products: end trimming and drilling of blanks. The machine operates in a cyclic mode, uses cassette feeding, fixes the blanks during processing and can be integrated into a production line.
Key features:
- Automatic cycle: trimming and drilling are performed without manual processing of each blank.
- 9 simultaneous drills: the equipment processes all positions in the cassette with adjustable drilling depth.
- Blank fixation: pneumatic and roller mechanisms hold the product during the working cycle.
- Length adjustment after trimming: from 180 to 220 mm for different product formats.
- Line integration: the machine can work together with conveyors and existing production equipment.
Operational benefits:
- Performance up to 120,000 blanks per day.
- Stable trimming and drilling geometry in serial production.
- Less manual labor on repetitive operations.
- Suitable for different sizes of frozen semi-finished products.
DrillMaster MSO3 helps make frozen food blank processing more stable, faster and less dependent on manual operations.
Typical client tasks for DrillMaster MSO3
-
Automating trimming and drilling of frozen blanks
Clients contact us when frozen food blanks need repeatable end trimming and hole drilling in a serial production process.
-
Increasing output for repetitive food production operations
DrillMaster MSO3 is relevant when manual or semi-automatic processing no longer provides the required capacity, consistency, or working rhythm.
-
Integrating the machine into an existing production line
Before selection, we review the blank dimensions, trimming requirements, drilling depth, required output, feeding logic, line layout, and integration conditions.
Main benefits of DrillMaster MSO3 for automatic trimming and drilling
DrillMaster MSO3 automates repetitive operations with frozen blanks, helps maintain a stable production pace and reduces dependence on manual labor.
-
Automatic working cycle
The machine performs end trimming and drilling after cassette loading, reducing the number of manual operations in the blank processing cycle.
-
Performance up to 120,000 blanks/day
DrillMaster MSO3 is designed for continuous operation in a production cycle and helps maintain a stable processing pace for large quantities of blanks.
-
Simultaneous operation of 9 drills
The drilling unit processes all positions in the cassette, while adjustable drilling depth up to 200 mm allows the process to be configured for a specific product.
-
Reliable blank fixation
Pneumatic clamps hold the blanks during drilling, helping ensure stable operation and reduce the risk of product displacement.
-
Stability in serial production
A robust design and automatic operating mode help maintain process repeatability during serial blank processing.
-
Use within the production process
The machine can work together with conveyors and adjacent equipment to support product feeding, processing and unloading.
-
Organized waste removal
Built-in containers and unloading mechanisms help separate trimmings and drilling waste from the main production flow.
-
Convenient access for maintenance
The design provides access to working assemblies for cleaning, adjustment and scheduled technical maintenance.
Technical specifications of DrillMaster MSO3
The technical parameters of DrillMaster MSO3 define the machine’s performance, operating mode, processing range and production requirements. The specifications help assess whether the equipment is suitable for your type of frozen blanks, production volume and workshop conditions.
Model: |
MSO3 | Automatic end trimming and drilling machine |
Productivity (max.) |
up to 120,000 pieces/day | Ensures stable production rhythm during continuous operation |
Number of cassettes
|
126 | Large capacity for continuous processing without frequent reloading |
Operating mode
|
cyclic | Suitable for standard production lines |
Rotation speed of drill bits
|
1450 rpm | Optimal speed for precise drilling |
Number of drill bits
|
9 | Simultaneous processing of all items in the cassette |
Drill diameter
|
22–26 mm | Suitable for various sizes of semi-finished products |
Drilling depth
|
up to 200 mm | Adjustable for precise process control |
Conveyor drive
|
gear motor, 3-phase, 380 V, N=0.37 kW, n=1370 rpm | Ensures smooth cassette movement and stable feeding |
Electric motor for drill drive
|
3-phase, 380 V, N=1.5 kW, n=1400 rpm | Powerful and reliable drive for drilling |
Electric motor for cutting knife
|
3-phase, 380 V, N=0.55 kW, n=1500 rpm | Ensures clean cutting of ends |
Pneumatic cylinder pressure
|
0.2–0.6 MPa | Reliable clamping of workpieces during drilling |
Product length after trimming
|
180–220 mm | Adjustability |
Dimensions (L×W×H) |
4200 × 1400 × 1220 mm | Compact placement in an industrial workshop |
Weight
|
450 кг | Stable construction, easy to maintain |
Waste system
|
Built-in containers with open lids | Automatic separation of cuttings and drilling products |
Control type
|
Automatic | Fully automated cutting and drilling cycles |
Operating temperature range
|
+5…+10 °C | Ideal for frozen semi-finished products |
Air humidity
|
≤80 % | Industrial production conditions taken into account |
DrillMaster MSO3 is designed for automatic end trimming and drilling of frozen semi-finished products in a cyclic mode. The combination of cassette feeding, 9 drills, adjustable drilling depth and a waste removal system helps the machine fit into an industrial production process and maintain a stable processing cycle.
Need to understand whether DrillMaster MSO3 is suitable for your product?
Send a request — an engineer will clarify the type of blanks, production volume, trimming and drilling requirements and suggest how DrillMaster MSO3 can be used in your production process.
DrillMaster MSO3 — machine design and assembly layout
The photos show the overall design of DrillMaster MSO3, the placement of working assemblies, the feeding area and the machine layout for integration into a production line. This helps evaluate dimensions, maintenance access and equipment ergonomics.
How we implement DrillMaster MSO3 in your production
Implementation of DrillMaster MSO3 starts with an analysis of your product, production volume and current process. After that, we select the operating parameters, perform installation, setup, a trial run and personnel training.
-
Product and production process analysis
We clarify the type of frozen blanks, required length after trimming, drilling depth, daily volume and specific features of your line.
-
Operating parameter selection
If needed, we adapt the machine’s working parameters to your product: trimming length, drilling depth, feeding format and integration with existing equipment.
-
Delivery, installation and connection
We organize the installation of DrillMaster MSO3 in the workshop, connect it to the required systems and prepare the machine for test startup.
-
Setup and test startup
We check trimming, drilling, blank fixation, cassette feeding and waste removal. The parameters are calibrated for your product.
-
Operator training
We instruct personnel on startup, basic setup, safe operation, cleaning and daily maintenance of the machine.
-
Service support after startup
We provide consultations, service maintenance and assistance with further settings or equipment modernization.
Select the parameters of the automatic machine DrillMaster MSO3 for your production
Need to automate trimming and drilling of frozen blanks in your production process?
Send a request — an engineer will clarify your product parameters, production volume and operating requirements, and suggest a suitable implementation format for DrillMaster MSO3.
we will contact you
Warranty and service support for DrillMaster MSO3 after startup
After DrillMaster MSO3 is started up, stable operation within the production cycle must be maintained. We support the client after startup: providing consultations, helping with settings, maintenance and further operation.
-
Warranty for assemblies and drives
Before handover to the client, the machine is checked across its main assemblies, drives and working mechanisms to confirm readiness for operation.
-
Technical consultations after startup
We help with questions related to setup, cycle operation, line integration and basic troubleshooting during operation.
-
Scheduled service maintenance
We perform inspection, adjustment, cleaning of working assemblies and replacement of worn elements to maintain correct equipment operation.
-
Selection of compatible spare parts
We help select components and consumable elements that match the DrillMaster MSO3 design and the operating mode of your production.
-
Operator training
We explain the rules for startup, operation, cleaning, daily checks and safe use of the machine in the production process.
Frequently Asked Questions
Answers to common questions about quoting, technical requirements, manufacturing, equipment, and cooperation with TM “Bulit”.
-
Which products is DrillMaster MSO3 suitable for?
DrillMaster MSO3 is designed for end trimming and drilling of frozen semi-finished products. Before selecting the equipment, it is necessary to clarify the product type, blank dimensions, required length after trimming and hole requirements.
-
What performance does the machine provide?
The maximum performance of DrillMaster MSO3 is up to 120,000 blanks per day. The actual result depends on the product type, operating mode, line settings and organization of blank feeding.
-
How many drills operate simultaneously?
DrillMaster MSO3 has 9 drills. They operate with adjustable drilling depth up to 200 mm, which allows the process to be configured for a specific blank format.
-
Can the product length after trimming be adjusted?
Yes. The product length after trimming is adjustable within the range of 180–220 mm. This allows the machine to be adapted to different formats of frozen semi-finished products.
-
Can DrillMaster MSO3 be integrated into an existing production line?
Yes, the machine can be integrated with conveyors and other production equipment. Before implementation, the current line, feeding format, installation location and product unloading requirements should be evaluated.
-
What operating conditions are required for DrillMaster MSO3?
According to the technical specifications, the operating temperature range is +5…+10 °C, and the allowable air humidity is ≤80 %. It is also necessary to consider the power supply, pneumatic connection and space for machine maintenance.
-
Does the machine require constant operator involvement?
DrillMaster MSO3 operates in an automatic cycle, but the operator controls loading, startup, correct operation, cleaning and basic equipment maintenance.
-
What is needed to select DrillMaster MSO3 for our production?
For a preliminary consultation, it is advisable to provide the type of frozen semi-finished product, blank dimensions, required length after trimming, drilling parameters, daily volume and information about the existing production line.
Similar equipment for production lines
Made to order
AirPack RP — Bag Opener
Equipment for automatic or semi-automatic bag opening before packaging bread and other food products.
Proceed
Made to order
ClipLine KL-1 — manual clip sealing line
Manual equipment for closing polyethylene or polypropylene bags with clipband tape. Suitable for food and bakery products.
Proceed
Made to order
DrillPro MSO-2 — Trimming and Drilling
Semi-automatic machine for edge trimming and hole drilling in blanks, with cassette feeding and pneumatic fixation.
Proceed
Need an automatic machine for trimming and drilling frozen blanks?
Send a request — a TM “Bulit” engineer will clarify your product parameters, production volume, trimming and drilling requirements, as well as how DrillMaster MSO3 can be used in your production process.
we will contact you