RBR Coil Decoiler — stable metal feeding with controlled unwinding and centering
RBR is an industrial coil decoiler for controlled unwinding and feeding of metal strip to downstream operations. The equipment helps stabilize work with metal coils, reduce shock loads and keep the material in the required working position.
Key features:
- Smooth unwinding: the metal coil is fed evenly, without sudden jerks or uncontrolled movement.
- Accurate centering: the expanding mechanism fixes the coil and helps keep it in the working position.
- Speed control: the braking system stabilizes the unwinding process and reduces load on the line.
- Robust construction: the reinforced frame ensures equipment stability when working with heavy coils.
- Controlled operation: position fixation and motion control help reduce the risk of sudden loads on equipment assemblies.
Benefits for your production:
- More stable metal feeding for cutting, roll forming, stamping or bending.
- Lower risk of misalignment, jerks and uneven material tension.
- Reduced load on downstream units of the production line.
- Faster coil replacement and less downtime during operation.
- A more predictable metal feeding process within the production cycle.
As a result, RBR helps make metal coil feeding more stable, controlled and predictable for downstream operations.
Typical client tasks for RBR Coil Decoiler
-
Feeding metal strip from a coil into a production line
Clients contact us when metal strip needs to be unwound from a coil and fed smoothly into downstream operations such as cutting, bending, stamping, profiling, or forming.
-
Stabilizing coil unwinding and strip feeding
RBR Coil Decoiler is relevant when uncontrolled unwinding, poor coil centering, uneven feeding, or manual handling creates instability in the production process.
-
Selecting a decoiler for specific coil parameters
Before selection, we review coil weight, strip width, coil diameter, feeding direction, line speed, centering needs, installation space, and compatibility with the next operation in the line.
Main advantages of the
RBR coil decoiler
RBR is an industrial coil decoiler for stable feeding of metal strip to downstream operations. The equipment design helps control unwinding, center the coil, reduce the risk of jerks and support consistent material feeding.
-
Smooth and controlled unwinding
The braking system helps maintain stable metal feeding without sudden jerks, misalignment or unnecessary stress on the material.
-
Operation with heavy coils
The decoiler supports coils weighing up to 1200 kg, making it suitable for industrial areas with high operating loads.
-
Accurate coil centering
The expanding plate mechanism fixes the coil in the working position and reduces the risk of axial displacement during unwinding.
-
Controlled assembly movement
The upper frame position lock helps control assembly movement and reduce the risk of sudden movement during operation.
-
Adaptation to downstream operations
RBR can be adapted to your coil type, feeding direction, line speed and metal feeding requirements for downstream operations.
-
Robust industrial construction
The reinforced frame and stable construction ensure reliable equipment operation under regular production loads.
-
Ease of maintenance
Key assemblies are accessible for inspection, adjustment and scheduled maintenance without unnecessary process complexity.
Technical specifications of the
RBR coil decoiler
Key parameters of the RBR coil decoiler for assessing compatibility with your coil type, feeding direction, operating conditions and metal feeding requirements.
Model
|
RBR | Industrial coil unwinder for a steady supply of metal to the production line |
Gearmotor
|
0.55 kW, Type 63, i = 80, 900 rpm | Ensures smooth and controlled rotation of the mechanism during operation |
Air pressure
|
0.2–0.6 MPa | Optimal operating pressure for stable operation of pneumatic cylinders and clamps |
Maximum coil weight
|
up to 1,200 kg | Suitable for handling heavy metal coils in industrial settings |
Outer diameter of the coil
|
from 800 to 1,500 mm | Supports the use of coils of various types and sizes |
Plywood consumption
|
from 340 to 520 mm | Allows you to securely fasten and center the coil depending on its type |
Dimensions (L×W×H)
|
2150 × 2000 × 2100 mm | Robust industrial design for integration into production lines |
Equipment weight
|
1,450 kg | Ensures structural stability and reliable performance under heavy loads |
Operating temperature
|
from +10 to +40 °C | Reliable operation of the equipment under standard production conditions |
Relative humidity
|
no more than 80% | Recommended conditions for safe and long-lasting operation of the equipment |
- Equipment advantages:
- Smooth unwinding of the metal coil without jerks
- Accurate coil centering and fixation
- Stable operation with coils weighing up to 1200 kg
Need a coil decoiler for your line parameters?
Send a request — we will clarify the metal type, coil weight, coil diameter, feeding requirements and prepare a quote for your production.
Design and execution of the RBR coil decoiler
View examples of RBR execution: industrial frame, fixation assemblies, centering mechanism and design solutions for stable feeding of metal strip to downstream equipment.
How we prepare and install the RBR coil decoiler for your process
Selection of the RBR coil decoiler starts with an analysis of your process: metal type, coil parameters, feeding speed and requirements for downstream operations. We then select the configuration and perform installation, adjustment and commissioning if required for the project.
-
Production process analysis
We assess the metal type, coil weight and diameter, line speed and the operations to which the material must be fed.
-
Configuration selection
We clarify the parameters of the expanding mechanism, fixation, braking system and structure for your production task.
-
Delivery and installation
We deliver the decoiler to the site and install it with consideration for the line layout and the operator’s working area.
-
Adjustment and commissioning
We check coil centering, smooth unwinding, operation of the braking mechanism and stability of metal feeding.
-
Personnel training
We explain to operators how to work with RBR, operating rules and basic maintenance procedures.
Need to stabilize metal feeding from a coil?
Jerks, coil misalignment and uneven metal feeding can create unnecessary load on downstream equipment, complicate the operator’s work and affect the stability of downstream operations.
Send a request — an engineer will clarify the coil parameters, metal type and feeding speed, and advise whether the RBR coil decoiler is suitable for your production.
we will contact you
Warranty and service support for the RBR coil decoiler
After the RBR coil decoiler is installed, you receive technical support: consultations on operation, adjustment, scheduled maintenance and stable operation of metal feeding assemblies.
-
Equipment warranty
Warranty terms are agreed upon at the order stage and depend on the configuration, operating mode and compliance with maintenance requirements.
-
Technical support
Engineers provide consultation on decoiler adjustment, operation of the braking mechanism, coil centering and feeding setup.
-
Service maintenance
We perform scheduled inspections, mechanism adjustments, assessment of assembly condition and recommendations for stable equipment operation.
-
Industrial components
We use industrial components compatible with the equipment design and the conditions of regular production operation.
-
Personnel training
We provide operator training on RBR operation, coil replacement, basic checks and operating rules.
Frequently Asked Questions
Answers to common questions about quoting, technical requirements, manufacturing, equipment, and cooperation with TM “Bulit”.
-
What coils is the RBR decoiler suitable for?
The RBR coil decoiler is designed to work with metal coils that need to be fed steadily into a production line. The equipment supports coil outside diameters from 800 to 1500 mm and weights up to 1200 kg.
-
What is the maximum coil weight for RBR?
The maximum coil weight is up to 1200 kg. Before selecting the equipment, we clarify the coil parameters, metal type and line operating conditions.
-
Can the decoiler be adapted to our coil and feeding requirements?
Yes, the RBR coil decoiler can be adapted to your metal type, coil weight, coil diameter, feeding direction, feeding speed and downstream operation requirements.
-
How does RBR ensure smooth metal feeding?
Smooth feeding is supported by the braking mechanism, position fixation and coil centering. This helps reduce jerks, misalignment and unnecessary load on downstream equipment.
-
What information is needed to estimate a coil decoiler?
For a preliminary estimate, it is advisable to provide the metal type, coil weight, outside diameter, coil width, feeding speed and a description of the downstream operation that will receive the material.
-
Are installation and commissioning included?
Depending on the project scope, we can provide delivery, installation, connection, adjustment and commissioning support for the coil decoiler at your facility.
-
Do you provide personnel training?
Yes, after equipment installation we provide operator training on RBR operation, coil replacement, basic checks and operating rules.
-
What warranty is provided for the RBR coil decoiler?
The equipment is provided with a 12-month warranty for main assemblies and drives, subject to compliance with operating, installation and maintenance requirements.
-
How can I order an RBR coil decoiler?
Send a request on the website or contact us in a convenient way. An engineer will clarify the coil parameters and metal feeding requirements, then prepare a solution for your production task.
Similar equipment for production lines
Made to order
FeedPro MPZ — Feeding Blanks to a Press
Machine for feeding sheet metal blanks to press equipment. Helps reduce manual work and stabilize the feeding cycle.
Proceed
Made to order
GridLift MZR — Grate Lifting Mechanism
Mechanism for removing, lifting and holding production grates up to 30 kg with semi-automatic control.
Proceed
Need an RBR coil decoiler for your production line?
Send us your coil parameters, metal type, strip width, feeding speed and a description of the downstream operation. A TM “Bulit” engineer will review the task and suggest a possible decoiler configuration for your production.
we will contact you