TM “Bulit” — industrial engineering and manufacturing in Lviv

We help production companies turn technical tasks into manufactured parts, equipment, assemblies, and working production solutions.

TM “Bulit” — industrial engineering and manufacturing in Lviv

TM “Bulit” is an engineering and manufacturing company in Lviv that develops custom industrial equipment, manufactures parts and assemblies, carries out equipment modernization and helps bring technical solutions into production.

Since 1996, we have worked with companies across different industries, combining engineering experience, in-house manufacturing capabilities and a practical approach to every project.

Our advantages:

  • 29+ years of experience in the development, manufacturing and modernization of industrial equipment
  • Completed engineering and manufacturing projects for companies across different industries and production challenges
  • Long-term B2B clients who have relied on us for engineering and manufacturing solutions for years
  • In-house engineering department for developing equipment, assemblies and parts for specific production needs
  • Delivered to 4 countries our solutions are used not only in Ukraine, but also outside the country

We do more than manufacture equipment — we help turn a production challenge into a working technical solution.

Typical production tasks clients bring to TM “Bulit”

  • Developing custom equipment for a production process

    Clients contact us when standard equipment does not fully match their product, operation, available space, required output, or production conditions.

  • Manufacturing parts, assemblies, and equipment components

    We are approached when a company needs parts or assemblies manufactured from drawings, 3D models, samples, or technical specifications for its production equipment.

  • Modernizing or launching production equipment

    Clients also contact us when existing equipment needs improvement, installation support, setup, start-up, or technical adaptation to a changed production process.

Key areas of work at TM “Bulit” for production challenges

Лазерне різання металу
Processing & Service
Sheet and tube laser cutting in Lviv

Laser cutting of sheet metal up to 18 mm and tubes Ø20–200 mm from drawings, DXF, DWG, or PDF files for production blanks.

Proceed
Custom industrial equipment development for your manufacturing task
Engineering & Development
Custom equipment development

Development and manufacturing of custom industrial equipment for specific production tasks, from engineering design to testing and implementation preparation.

Proceed
Engineering design and drafting services for manufacturing documentation
Engineering & Development
Mechanical design and drafting services

Development of 3D models, drawings, and engineering documentation for parts, assemblies, mechanisms, and industrial equipment.

Proceed

TM “Bulit” equipment designed and manufactured for production needs

Transport and logistics Popular models
Made to order RBR Coil Decoiler

Equipment for smooth unwinding, centering and stable feeding of metal strip to downstream operations.

Proceed
Product processing
Made to order DrillMaster MSO3 — Trimming and Drilling

Automatic machine for end trimming and drilling frozen food blanks in serial food production.

Proceed
Product processing Popular models
In stock SlicePro — Industrial Bread Slicer

Equipment for uniform slicing of bread, loaves and other bakery products before packaging.

Proceed

Engineering and manufacturing capabilities

At TM “Bulit”, we combine engineering design, 3D modeling and in-house manufacturing capabilities to create equipment for real production challenges.

We work with projects from an idea or technical specification to part manufacturing, assembly, installation and start-up of the finished solution.

  • Engineering design for your specific task – we develop structures, assemblies and equipment with your process, required output and operating conditions in mind.

  • 3D modeling and engineering documentation – we prepare models, drawings and technical documentation for manufacturing parts, assemblies and industrial equipment.

  • In-house manufacturing of parts and assemblies – we use TM “Bulit” manufacturing capabilities: laser cutting, CNC milling, welding and other metalworking stages.

  • Manufacturing, installation support and start-up – we support the project from drawings to assembly, installation, operational testing and equipment start-up in production.

Effective equipment starts with a clear engineering concept, accurate manufacturing and controlled implementation stages.

Warranty and service
from TM “Bulit”

We support equipment after manufacturing and start-up: we help with setup, technical questions, post-launch checks and further recommendations according to production needs.

Warranty and service from TM “Bulit”
  • Inspection before equipment handover

    We check manufacturing quality, assembly quality and equipment operation before handover to reduce the risk of issues after start-up.

  • Post-launch technical support

    We provide technical support, help clarify settings, review equipment operation and recommend next steps when needed.

  • Individual client support

    We work with the specifics of your production, the equipment design and the tasks it must perform.

  • Response to service requests

    We help remotely or visit the site when it is necessary to check equipment operation, clarify an issue or agree on further technical actions.

  • Recommendations for possible improvements

    We review equipment operation and suggest possible improvements to assemblies, settings or control elements when production requirements change.

Clients who have chosen TM “Bulit” for years

Companies across different industries trust us with engineering design, manufacturing, modernization and service of equipment for their production challenges.
Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years Clients who have chosen TM “Bulit” for years

Why clients choose TM “Bulit”

We combine engineering planning, in-house manufacturing and practical experience in equipment start-up so the client receives a technical solution adapted to the production process.

  • Engineering solution for a specific process

    Before development, we analyze the task, operating conditions, product, required output and equipment requirements so the solution fits the real production environment.

  • In-house manufacturing of parts and assemblies

    We have manufacturing capabilities for producing parts, assemblies and structures: from laser cutting to machining, welding and assembly.

  • 29+ years of experience and 500+ completed projects

    We have worked with manufacturing companies since 1996 and understand how important it is to consider not only the design, but also the future operation of the equipment.

  • Project support from concept to start-up

    We support the project at every stage: idea, 3D model, drawings, manufacturing, installation, setup and launch into production.

  • Several manufacturing services through one contractor

    Laser cutting, CNC milling, welding and part manufacturing can be performed either separately or as part of a complex project.

  • Clear communication and support

    We explain the work stages, agree on technical solutions, stay in contact during implementation and help after equipment start-up.

Media mentions

TM “Bulit” in publications about manufacturing, metalworking and automation

A curated selection of articles mentioning TM “Bulit” as a Ukrainian engineering and manufacturing company for industrial B2B tasks — from custom parts to automation and non-standard equipment.

Bulit Engineering Blog

Practical Manufacturing Insights

Engineering insights on manufacturing, metalworking, automation and industrial equipment.

View all articles

Frequently Asked Questions

Answers to common questions about quoting, technical requirements, manufacturing, equipment, and cooperation with TM “Bulit”.

Frequently Asked Questions
  • Can TM “Bulit” develop custom industrial equipment from scratch?

    Yes. We can start from a production task, a technical idea, or a process that needs to be improved or automated. After reviewing the task, we define the right work format: engineering design, 3D modeling, part manufacturing, assembly, installation support, and equipment start-up.

  • Do I need ready drawings or a technical specification?

    Not necessarily. If you already have drawings or a technical specification, it helps us assess the task faster. If not, you can describe the production process, problem, or expected result, and our engineer will help clarify the next steps.

  • What types of industrial equipment can you manufacture?

    We work with custom industrial equipment, mechanisms, assemblies, production line elements, and solutions for equipment modernization. The final format depends on the task, product, operating conditions, and required productivity.

  • Can you both design and manufacture the equipment?

    Yes. TM “Bulit” combines an engineering department with in-house manufacturing capabilities. We can develop the concept, prepare documentation, manufacture parts and assemblies, perform assembly, provide installation support, and assist with start-up.

  • Do you work with equipment modernization?

    Yes. We can review existing equipment, identify weak points, and suggest improvements to mechanical units, structures, settings, or control systems. The goal is to make the production process more stable, practical, or efficient.

  • How is the cost of engineering and manufacturing calculated?

    The cost depends on the complexity of the task, the scope of engineering work, the number of parts and assemblies, materials, manufacturing operations, installation support, and start-up requirements. For an initial estimate, you can send a task description, drawing, sketch, photo, or technical specification.

Describe your production challenge — we will suggest a technical solution

Describe your production challenge — we will suggest a technical solution

Tell us what equipment, part, assembly or production task you need to solve. A TM “Bulit” engineer will contact you, clarify the details and suggest a suitable work format: engineering, manufacturing, modernization, a specific production service or a complete project.

Submit a request for an engineer consultation